|本期目录/Table of Contents|

[1]庄煌煌,何宏舟,黄伟明,等.入口下倾小型旋风分离器的仿真设计[J].集美大学学报(自然科学版),2011,16(5):373-379.
　ZHUANG Huang-huangHE Hong-zhouHUANG Wei-mingJING Xing-rong.Numerical Design of a Small Stairmand High-Efficiency Cyclone[J].Journal of Jimei University,2011,16(5):373-379.
点击复制

入口下倾小型旋风分离器的仿真设计(PDF)
分享到：

《集美大学学报（自然科学版）》[ISSN:1007-7405/CN:35-1186/N]

卷:
第16卷
期数:
2011年第5期
页码:
373-379
栏目:
船舶与机械工程
出版日期:
2011-09-25

文章信息/Info

Title:
Numerical Design of a Small Stairmand High-Efficiency Cyclone
作者:
庄煌煌; 何宏舟; 黄伟明; 景兴荣
(集美大学机械工程学院,福建 厦门 361021)
Author(s):
ZHUANG Huang-huangHE Hong-zhouHUANG Wei-mingJING Xing-rong
(School of Mechanical Engineering,Jimei University,Xiamen 361021,China)
关键词:
旋风分离器; 数值模拟; 结构参数; 除尘效率; 运行压降Numerical Design of a Small Stairmand High-Efficiency Cyclone
Keywords:
cyclone separator; numerical simulation; structure parameter; dust separation efficiency; press-drop
分类号:
-
DOI:
-
文献标志码:
-
摘要:
以一台4 t/h燃煤锅炉烟气的旋风分离器为对象，采用R-k-ε湍流模型，利用Fluent软件对Stairmand HE型分离器内部流场进行三维数值仿真分析，并采用离散相模型对固体颗粒进行追踪，研究旋风分离器筒体结构及运行参数对其分离效率、运行压降和磨损的影响，获得了同时具有较高分离效率、较低运行压降、较少磨损的入口下倾分离器筒体结构参数
Abstract:
The unsteady characteristic of gas-solid flow in a Stairmand HE type cyclone separator were numerically studied by using the FLUENT software combined with the CAE method.In simulation,the R-K-ε model was adopted to calculate the gas flow,the Discrete Phase Model (DPM) was adopted to calculate the particle flow,the effects of the cyclone?s structure and its operational parameters on dust separation efficiency,press-drop,and abrasion was also analyzed,and a new cyclone structure which had such performance characters as a relatively high separation efficiency,low running press-drop as well as light abrasion for a 4t/h coal boiler was obtained

参考文献/References:

-

相似文献/References:

[1]李晖.HVPE反应器内输运现象的数值模拟研究[J].集美大学学报(自然科学版),2010,15(5):378.
　LI Hui.Numerical Study of Transport Phenomena in a HVPE Reactor[J].Journal of Jimei University,2010,15(5):378.
[2]梁杰,李晖,郑捷庆.锥形浮子入水冲击受力状态的数值模拟[J].集美大学学报(自然科学版),2016,21(1):60.
　LIANG Jie,LI Hui,ZHENG Jie-qing.Numerical Study on Water Entry Impact of Conical Buoy[J].Journal of Jimei University,2016,21(5):60.
[3]于小平,刘建闽,陈景锋.静水中高速艇纵向运动数值模拟[J].集美大学学报(自然科学版),2016,21(1):49.
　YU Xiao-ping,LIU Jian-min,CHEN Jing-feng.Longitudinal Motion Simulation for High-Speed Crafts in Steady Water[J].Journal of Jimei University,2016,21(5):49.
[4]李晖,何宏舟,杨绍辉,等.点头鸭式波浪能采集装置的数值模拟[J].集美大学学报(自然科学版),2016,21(5):363.
　LI Hui,HE Hong-zhou,YANG Shao-hui,et al.Numerical Simulation on Salter Duck Wave Energy Converter[J].Journal of Jimei University,2016,21(5):363.
[5]杨云朋,张军,吕国录,等.水下油气水平释放与垂直释放时扩散规律的比较[J].集美大学学报(自然科学版),2018,23(1):57.
　YANG Yunpeng,ZHANG Jun,LYU Guolu,et al.Comparative of Diffusion Law Between Horizontal Release and Vertical Release of Underwater Oil and Gas[J].Journal of Jimei University,2018,23(5):57.
[6]韩雁鹏,高小瑞,朱钰.基于多次喷射的柴油机燃烧过程数值模拟[J].集美大学学报(自然科学版),2018,23(4):287.
　HAN Yanpeng,GAO Xiaorui,ZHU Yu.Numerical Simulationon Combustion Process of Diesel Engine Based on Multi-injection[J].Journal of Jimei University,2018,23(5):287.
[7]李晖,杨绍辉,张军,等.多对偶夹角开合式TENG的结构设计和发电性能分析[J].集美大学学报(自然科学版),2023,28(1):60.
　LI Hui,YANG Shaohui,ZHANG Jun,et al.Structure Design and Electrical Performance Study of the Angular Contact-Separation TENG with Multi-Dielectric Plate Pairs[J].Journal of Jimei University,2023,28(5):60.
[8]杨晨,陶求华,郑健雯.光伏组件多元复合相变材料控温特性研究与模拟[J].集美大学学报(自然科学版),2024,29(2):171.
　YANG Chen,TAO Qiuhua,ZHENG Jianwen.Research and Simulation on Temperature Control Characteristics of Multi-Component Composite Phase Change Materials for Photovoltaic Modules[J].Journal of Jimei University,2024,29(5):171.

备注/Memo

备注/Memo:
-
更新日期/Last Update: 2018-06-13