|本期目录/Table of Contents|

[1]朱飞勇,陈祝平,杨光.稀土添加剂对感应加热渗硼的影响[J].集美大学学报(自然科学版),2013,18(2):128-133.
 ZHU Fei-yong,CHEN Zhu -ping,YANG Guang.The Gap and Boron-RE Permeation Induction Heating Boronizing[J].Journal of Jimei University,2013,18(2):128-133.
点击复制

稀土添加剂对感应加热渗硼的影响(PDF)
分享到:

《集美大学学报(自然科学版)》[ISSN:1007-7405/CN:35-1186/N]

卷:
第18卷
期数:
2013年第2期
页码:
128-133
栏目:
船舶与机械工程
出版日期:
2013-03-25

文章信息/Info

Title:
The Gap and Boron-RE Permeation Induction Heating Boronizing
作者:
朱飞勇陈祝平杨光
(集美大学机械工程学院,福建 厦门 3621021 )
Author(s):
ZHU Fei-yongCHEN Zhu -pingYANG Guang
(School of Mechanical Engineering,Jimei University,Xiamen 361021, China)
关键词:
感应加热渗硼硼稀土共渗催渗
Keywords:
induction heatingboronizingboron rare earth permeationaccelerated boronizing
分类号:
-
DOI:
-
文献标志码:
-
摘要:
        使用超音频加热电源进行感应加热渗硼,研究稀土在感应加热渗硼中的作用.结果表明:在功率P=3900 W,感应加热时间t=8 min,感应间隙a=19.5 mm时,渗硼层为共晶渗硼结构.硬度测试为软硬相配组织,渗层厚度423.4 μm;在硼稀土二元共渗试验中,发现添加氯化镧时,其渗硼层厚度增加10%以上,并且渗硼层的组织更密,硬度下降趋于缓慢
Abstract:
With super audio heating power for induction heating boronizing,the role of rear earth in induction heating boronizing was studied.The results show that the boronizing layer was of eutectic boronizing structure when the power P was 3900 W,induction heating time t was 8 min,and induction rape a was 19.5 mm.By hardness testing,the organization was matching with software and hardware,and the boronzing layer thickness was 423 .4 μm;From the boron rare earth binary permeation test,it was found that after adding lanthanum chloride into the paste,the boronizing thickness would increase by more than 10%,and the tissue of boronizing layer would be more dense,and the hardness would decreased slowly.

参考文献/References:

-

相似文献/References:

备注/Memo

备注/Memo:
-
更新日期/Last Update: 2014-06-28