|本期目录/Table of Contents|

[1]洪斯琦,朱钰,江小霞.船舶起重机的机电液一体化联合仿真[J].集美大学学报(自然科学版),2014,19(1):36-41.
　HONG Si-qi,ZHU Yu,JIANG Xiao-xia.Hydro-mechatronic Co-Simulation of the Ship Hydraulic Crane[J].Journal of Jimei University,2014,19(1):36-41.
点击复制

船舶起重机的机电液一体化联合仿真()
分享到：

《集美大学学报（自然科学版）》[ISSN:1007-7405/CN:35-1186/N]

卷:
第19卷
期数:
2014年第1期
页码:
36-41
栏目:
船舶与机械工程
出版日期:
2014-01-25

文章信息/Info

Title:
Hydro-mechatronic Co-Simulation of the Ship Hydraulic Crane
作者:
洪斯琦; 朱钰; 江小霞
集美大学轮机工程学院，福建 厦门 361021
Author(s):
HONG Si-qi; ZHU Yu; JIANG Xiao-xia
Marine Engieering Institute，Jimei University,Xiamen 361021,China
关键词:
船舶; 起重机; 液压系统; 联合仿真
Keywords:
ship; crane; hydraulic system; co-simulationundefined
分类号:
-
DOI:
-
文献标志码:
A
摘要:
为了研究船舶起重机的消摆操纵控制策略，需建立起重机的虚拟样机.采用Pro/E三维设计软件建立起重机的几何模型，将其导入ADAMS软件中，定义构件的材料及相对运动关系，并采用由轴套力连接小圆柱体的方法，建立钢丝绳模型；在AMESim软件平台上建立起重机回转、起升和变幅操纵机构的液压系统模型；最后在AMESim Advanced高级建模与仿真平台上建立集机械、液压与控制系统的一体化仿真模型.利用静态理论计算对所建模型进行验证，结果表明：所建模型的静态和动态仿真结果能准确代表实际起重机结构和操纵系统，该模型可以用来开展下一步的消摆控制研究.
Abstract:
In order to study the anti-sway control strategies of the crane on board ship,the virtual prototype of the crane needs to be built.The 3D design software Pro/E was used to build the geometric model of the crane.The model was imported to the ADAMS software and the material and relative motion of the parts were defined.The cable model was built by a serials of the cylinders connected by bushings.The model of the slewing,luffing and lifting hydraulic systems of the crane were built up using AMESim software.Finally the mechanical,hydraulic,electric control models were integrated on AMESim Advanced software platform.The static theories on mechanical and fluid were used to verify the virtual prototype of the crane.The results showed that the static and dynamic simulations of this model could represent precisely the structure and operating system of the real crane.Therefore this model can be used to study the anti-sway control of the crane in the next stage.

参考文献/References:

-

相似文献/References:

[1]黄鹏飞,周建文,黄艳玉,等.AIS在海事调查处理中的应用[J].集美大学学报(自然科学版),2010,15(6):38.[doi:2010/12/30 0:00:00]
[2]郑为民,俞万能.小型船舶电力推进系统谐波分布研究[J].集美大学学报(自然科学版),2010,15(3):208.
　ZHENG Wei-min,YU Wan-neng.On Harmonic Distribution of Small Ship Electric Propulsion System[J].Journal of Jimei University,2010,15(1):208.
[3]黄鹏飞,周建文,黄艳玉.AIS在海事调查处理中的应用[J].集美大学学报(自然科学版),2010,15(6):438.
[4]彭国均,柯冉绚,陈金海.E-Navigation架构下船舶引航系统[J].集美大学学报(自然科学版),2012,17(3):190.
　PENG Guo-jun,KE Ran-xuan,CHEN Jin-hai.Development Research on Ship Pilot System Based on the Framework of E-Navigation[J].Journal of Jimei University,2012,17(1):190.
[5]刘建华.基于组态技术的船舶燃油净化系统的动态仿真[J].集美大学学报(自然科学版),2012,17(4):275.
　LIU Jian-hua.Dynamic Simulat Of the Fuel Oil Purifying System for Ships Based on Configuration Technology[J].Journal of Jimei University,2012,17(1):275.
[6]李俊科,俞万能,严华.小型船舶综合全电力推进实验平台的研制[J].集美大学学报(自然科学版),2012,17(4):269.
　LI Jun-ke,YU Wan-neng,YAN Hua.Development of Experimental Platform for the Small Marine Integrated Electric Propulsion System[J].Journal of Jimei University,2012,17(1):269.
[7]陈清彬.EEDI技术性减排措施分析[J].集美大学学报(自然科学版),2012,17(6):454.
　CHEN Qing-bin.Discussion on EEDI Technical Emission Reduction Measures[J].Journal of Jimei University,2012,17(1):454.
[8]郑超瑜,陈武.船用溶液除湿蒸发冷却空调系统[J].集美大学学报(自然科学版),2012,17(6):443.
　ZHENG Chao-yuCHEN Wu.Marine Liquid-Desiccant Evaporative-cooling Air-conditioning System andIts Performance Analysis[J].Journal of Jimei University,2012,17(1):443.
[9]项勇兵,陈杰,黄加亮.4190 ZLC型船用中速柴油机平均值模型仿真[J].集美大学学报(自然科学版),2015,20(1):47.
　XIANG Yong-bing,CHEN Jie,HUANG Jia-liang.Simulation Study on the Average Model for 4190 ZLC Medium-speed Marine Diesel Engine[J].Journal of Jimei University,2015,20(1):47.
[10]杨杰,张银东,王生海,等.船舶综合液压推进系统主机的恒功率控制分析[J].集美大学学报(自然科学版),2015,20(3):208.
　YANG Jie,ZHANG Yin-dong,WANG Sheng-hai,et al.Analysis of Constant Power Control of Main Engine of Integrated Hydraulic Propulsion Systems for Ships[J].Journal of Jimei University,2015,20(1):208.

备注/Memo

备注/Memo:
-
更新日期/Last Update: 2014-12-01