|本期目录/Table of Contents|

[1]项勇兵,黄加亮.基于Simulink的高速电磁阀动态响应分析[J].集美大学学报(自然科学版),2014,19(4):291-297.
　XIANG Yong-bing,HUANG Jia-liang.Modeling and Simulation of Dynamic Response Analysis of High-speed Solenoid Valve[J].Journal of Jimei University,2014,19(4):291-297.
点击复制

基于Simulink的高速电磁阀动态响应分析()
分享到：

《集美大学学报（自然科学版）》[ISSN:1007-7405/CN:35-1186/N]

卷:
第19卷
期数:
2014年第4期
页码:
291-297
栏目:
船舶与机械工程
出版日期:
2014-07-25

文章信息/Info

Title:
Modeling and Simulation of Dynamic Response Analysis of High-speed Solenoid Valve
作者:
项勇兵1; 黄加亮1; 2
1.集美大学轮机工程学院，福建 厦门361021；2.福建省船舶与海洋工程重点实验室，福建 厦门361021
Author(s):
XIANG Yong-bing1; HUANG Jia-liang1; 2
1.Marine Engineering Institute,Jimei University,Xiamen 361021,China;2.Fujian Provincial Key Laboratory of Naval Architecture and Ocean Engineering,Xiamen 361021,China
关键词:
高速电磁阀; 建模; 仿真; 动态响应特性
Keywords:
high-speed solenoid valve;  modeling;  simulation;  dynamic response characteristics
分类号:
-
DOI:
-
文献标志码:
A
摘要:
利用MATLAB/Simulink软件建立了由磁场强度模型、电磁作用力模型、阀芯运动阻力模型以及回位弹簧作用力模型组成高速电磁阀仿真模型.分析了驱动电压、电磁力、阀芯质量和线圈匝数等参数对电磁阀动态响应特性的影响.仿真结果表明：在一定条件下增加驱动电压，采用质量小的阀芯，选取小的回位弹簧预紧量，减少线圈匝数和降低弹簧刚度，有利于加快电磁阀开启响应速度，而降低维持电压，适当减小工作气隙、增大弹簧刚度，有利于加快关闭响应速度.
Abstract:
A high-speed solenoid valve simulation model was established based on Matlab/simulink software.The valve model was composed of the magnetic field intensity sub-model,the electromagnetic force sub-model,the valve core motion resistance sub-model and return spring force sub-model.Using the simulation model the effects on the dynamic response of high-speed solenoid valve respectively from the parameters including driving voltage,electromagnetic force,mass of valve core and turns of electric coil were evaluated.Simulation results shown that under certain conditions increasing the driving voltage,using small mass of valve core and small amount of return spring preload,reducing coil number of turns and lowering spring stiffness could all help speed up the opening response speed of the solenoid valve,and meanwhile reducing the maintain voltage,increasing appropriately the spring stiffness and decreasing the working air gap could all help speed up the closing response speed.

参考文献/References:

-

相似文献/References:

[1]王永坚,杨国豪.Web3D主机控制台建模及遥控起动仿真过程研究[J].集美大学学报(自然科学版),2010,15(5):364.
　WANG Yong-jianYANG Guo-hao.Study of Web3D M/E Console Modeling and M/E Remote Starting Control Simulation Process[J].Journal of Jimei University,2010,15(4):364.
[2]李精明,陈铭治.一种俄制锅炉水位自动控制系统建模分析[J].集美大学学报(自然科学版),2013,18(3):208.
　LI Jing-mingCHEN Ming-zhi.Modeling Analysis of Automatic Control System for Boiler Water Level on a Russian Boiler[J].Journal of Jimei University,2013,18(4):208.

备注/Memo

备注/Memo:
-
更新日期/Last Update: 2014-12-02