|本期目录/Table of Contents|

[1]吕楚奇,吴秋平,李延平,等.浮动平底推杆-盘形凸轮组合机构的轮廓设计[J].集美大学学报(自然科学版),2016,21(4):300-304.
　LYU Chu-qi,WU Qiu-ping,LI Yang-ping,et al.Cam Profile Design of Floating Flat Pushrod-Disc Cam Combined Mechanism[J].Journal of Jimei University,2016,21(4):300-304.
点击复制

浮动平底推杆-盘形凸轮组合机构的轮廓设计(PDF)
分享到：

《集美大学学报（自然科学版）》[ISSN:1007-7405/CN:35-1186/N]

卷:
第21卷
期数:
2016年第4期
页码:
300-304
栏目:
船舶与机械工程
出版日期:
2016-07-28

文章信息/Info

Title:
Cam Profile Design of Floating Flat Pushrod-Disc Cam Combined Mechanism
作者:
吕楚奇1; 吴秋平1; 李延平1; 常勇1; 2
(1.集美大学机械与能源工程学院，福建 厦门 361021；2.集美大学工程训练中心，福建 厦门 361021）
Author(s):
LYU Chu-qi1; WU Qiu-ping1 ; LI Yang-ping1; CHANG Yong1; 2
(1.School of Mechanical and Energy Engineering, Jimei University，Xiamen 361021，China;2.Engineering Training Center，Jimei University，Xiamen 361021，China)
关键词:
平底推杆; 盘形凸轮; 反转法; 数控仿真; 轮廓设计
Keywords:
flat pushrod; disc cam; kinematic inversion; NC simulation; profile design
分类号:
-
DOI:
-
文献标志码:
A
摘要:
盘形凸轮的基本尺寸已得到解决，但还存在确定凸轮轮廓线的难题。选择“反转法”，应用旋转矩阵的数学手段，推演了凸轮轮廓的参数方程，并运用MasterCAM X7软件，对凸轮轮廓线做了数控仿真校验，完成了浮动平底推杆-盘形凸轮组合机构的凸轮轮廓设计，进一步完善了该组合机构的结构设计。
Abstract:
It is still a difficulty to determine the profile of the disc cam in spite of some progresses have been achieved on setting the basic dimension of the cam.In this paper,the “Kinematic Inversion” was employed the rotational matrix method was further applied to derive the parameter equation for the cam profile.The verification of the numerical control (NC) was realized by the simulation carried out based on the software MasterCAM X7.It notes that the design of cam profile for floating flat pushrod-disc cam combined mechanism can be accomplished as per the results from simulation.Conclusion is drawn that the work performed in this paper is beneficial to the design of this mechanism.

参考文献/References:

-

相似文献/References:

备注/Memo

备注/Memo:
-
更新日期/Last Update: 2016-09-24