|本期目录/Table of Contents|

[1]郑青榕,潘其永,解晨,等.吸附式制冷在船舶中央空调系统中的应用[J].集美大学学报(自然科学版),2011,16(2):118-122.
　ZHENG Qing-rong,PAN Qi-yong,XIE Chen,et al.Application of Adsorption Refrigeration to Ship?s Central Air Conditioning System[J].Journal of Jimei University,2011,16(2):118-122.
点击复制

吸附式制冷在船舶中央空调系统中的应用(PDF)
分享到：

《集美大学学报（自然科学版）》[ISSN:1007-7405/CN:35-1186/N]

卷:
第16卷
期数:
2011年第2期
页码:
118-122
栏目:
航海技术与物流工程
出版日期:
2011-03-25

文章信息/Info

Title:
Application of Adsorption Refrigeration to Ship?s Central Air Conditioning System
作者:
郑青榕; 潘其永; 解晨; 智会杰
(集美大学轮机工程学院,福建 厦门 361021)
Author(s):
ZHENG Qing-rong; PAN Qi-yong; XIE Chen; ZHI Hui-jie
(Marine Engineering Institute,Jimei University,Xiamen 361021,China)
关键词:
吸附式制冷; 船舶柴油机; 冷却水; 硅胶-水
Keywords:
adsorption refrigeration; marine diesel engine; cooling water; silica gel-water
分类号:
-
DOI:
-
文献标志码:
-
摘要:
以实际营运船舶额定工况下空调负荷为基准，首先从热平衡角度，分析利用柴油机缸套冷却水余热制冷的可行性.其次以特定船舶中央空调所需冷量为标准，对吸附式制冷系统的核心部件吸附床进行初步设计.最后对吸附单元进行传热传质数值计算，分析吸附床厚度、缸套水流速、硅胶填充密度及硅胶比热容对吸附床传热性能的影响
Abstract:
In this paper,the heat load of ship?s central air conditioning system at nominal working condition was used to evaluate the feasibility of the application of adsorption refrigeration by employing the cooling water of the marine diesel engine as heating source.The silica gel-water was selected as working pair.An adsorbent bed,specially designed to conform to the working condition on ships,was developed.Finally,numerical simulation for the heat transfer enhancement was carried out on a typical tube of the adsorbent bed.Comparisons were made for the influence on the performance of the adsorbent bed by the thickness of the adsorbent layer,the cooling water capacity,the packing density and the specific heat of the silica gel

参考文献/References:

-

相似文献/References:

[1]刘世杰,俞文胜,蔡振雄,等.高温热泵回收船舶柴油机余热的应用分析[J].集美大学学报(自然科学版),2010,15(2):133.
　LIU Shi-jie,YU Wen-shengCAI Zhen-xiong,CHEN Wu.Application Analysis on High Temperature Heat Pump forWaste Heat Recovery of Marine Diesel Engines[J].Journal of Jimei University,2010,15(2):133.
[2]郑和东,林金表,蔡振雄,等.船舶柴油机曲轴臂距差电子测量仪的研制[J].集美大学学报(自然科学版),2010,15(5):369.
　ZHENG He-dongLIN Jin-biao,CAI Zhen-xiong,TENG Xian-bin,et al.Study of Electronic Crankshaft DeflectionIndicator for Marine Diesel Engine[J].Journal of Jimei University,2010,15(2):369.
[3]温朋,黄加亮,吴鹏举.大型低速船用柴油机余热回收装置的平衡分析[J].集美大学学报(自然科学版),2014,19(2):127.
　WEN Peng,HUANG Jia-liang,WU Peng-ju.Exergy Equilibrium Analysis of Waste Heat Recovery System for Large-scale Low-speed Marine Diesel Engine[J].Journal of Jimei University,2014,19(2):127.
[4]林航,王奇伟,陈美谦,等.掺烧不同比例的异戊醇对船舶柴油机性能的影响[J].集美大学学报(自然科学版),2024,29(1):47.
　LIN Hang,WANG Qiwei,CHEN Meiqian,et al.Effect of Blending Different Proportion of Isoamyl Alcohol on the Performance of Marine Diesel Engine[J].Journal of Jimei University,2024,29(2):47.
[5]陈坚,林航,叶子枭,等.船用双燃料柴油机多参数优化匹配分析[J].集美大学学报(自然科学版),2024,29(3):238.
　CHEN Jian,LIN Hang,YE Zixiao,et al.Analysis of Multi-Parameter Optimization and Matching for Dual-Fuel Marine Diesel Engines[J].Journal of Jimei University,2024,29(2):238.

备注/Memo

备注/Memo:
-
更新日期/Last Update: 2018-06-13